Рейтинг@Mail.ru

HOT FILLED PRODUCT

HOT FILLED PRESSURE

Hot pressure fillers suitable for:
- ice-tea;
- juices;
- ambient cocktails for PET, glass bottles.
Fillers can be produce as stand alone machines and monoblock as well include rinser, filling and closure options.

TECHNICAL DATA

Capacity

8.000 - 48.000 BPH for 500 ml

Rinsing and spraying water consumption

~ 0.3-1.8 m3/h

Compressed air demand

15 (24) m3/h at 6 bar

Supply voltage

3 x 400 V, 50 Hz

Supply voltage of control system

24 V DC

Power rating

3 - 48 kW

Protection of mains

25 A

Degree of machine protection IP

54

Noise level

≤ 78 dbA

Dimensions (L x W x H)

3000 (4800) x 2000 (3300) x 3000 mm

Weight

3000 (4500)  kg

Blow-Molding Machines

Blow-Molding Machines 2000e series More information

LABELING EQUIPMENT

Linear sleeve machine 6000-18000 bph More information

Cap sterilizer

PASTEURIZERS

Cooling Tunnel

Used for pasteurization and cooling of hotfilled products in bottles. The tunnel is supplied in 3 sections to guarantee flexible processing.

PRE-COOLING: 6000-24000 mm
COOLING:  5500-22000 mm
FINAL COOLING: 5500-22000  mm
Capacity, based on 50 min. cycle: 9400-38000  bph

bottle diameter 69 mm

Each section is supplied with stainless steel circulation pumps and digital thermostatic controlled cooling system. There is an additional cooling water pipeline with pneumatic valve connection to each section, for instant requirement of chilled water when cooling temperatures are excessive. Bottles are cooled under dense water shower in preset temperature zones and for preset time (by means of a speed variator).

The tunnel is supplied with industrial PC (15" touchscreen display). All process data is recorded on the hard drive of the PC and can be easily transferred via USB port.

Cooling times, individual temperature of each section can be adjusted from the user-friendly display. The temperature logs for each section can be printed out from any PC writer.

In case of any emergency stop, the tunnel can send a stop signal to the filler as well as to the leading process equipment. Any failure of installed electric motors - conveyor, pumps - will be displayed on the touchscreen and will lead buzzer alarm.

The tunnel conveyor is made of injection mould polypropylene.

 

STANDARD EQUIPMENT COMPLETION:

  • Tunnel entirely made in AISI 304;
  • IP.66 stsinless steel electrical cabinet;
  • Spirax Sarco pneumatic valves;
  • Festo pneumatics;
  • Exit and entry flat top chain conveyors in AISI 304.

Video

EXPLORE ANOTHER EQUIPMENT: