Рейтинг@Mail.ru

500-4500 KGH AUTOMATIC LONG PASTA

500-4500 KGH AUTOMATIC LONG PASTA

L.P.L. ATR

Automatic and continuous L.P.L. line, engineered and manufactured for the production of long cut pasta on aluminium sticks, suitable for a production capacity from 500 to 4.000 kg/h. This line is suitable for drying any type of long-cut pasta, from the traditional spaghetto  Ø 1.7 to the candle diam. 18 mm.

The line is engineered to customize the drying diagram. The controlling devices along the line and the supervision by personal computer, allow the operator any kind of modification. 

The line consists of an AXOR-Ocrim press, manufactured as per the most modern technologies, allowing the operator to customize the dough as per his requirements.

Automatric spreader St.Ax to spread (more sticks at the same time) the product on the sticks. The spreader St.Ax ensure an efficaceous distribution of the product on the sticks.

Continuous predrying with complete ventilation and sticks driven by chain.  The chain is manufactured using a pitch that allows the hot air passage at high pressure coming from the fans placed on the heating batteries.

5 floors continuous dryer; sticks driven by a 4-angles movement by double flat-rack. The double flat rack has a constant pitch and allows the transport of the products all over the dryer floors. The set up climate is maintained by heating batteries and airing channels. The last floor of the dryer is used to stabilize the product.

The product cooling is realized in a thermically separate unit, connected by a chain lift. The cooling is ensured by the airing surrouding completely the product, and taking humidity to the required value.

The complete  L.P.L. line consists of :

  • Self-adjustable feet allowing to level machines to any type of floors.
  • Stainless steel supporting frames which grant stability and a longer lifetime of the whole installation.
  • High performance batteries with flanged connections uni 2282.
  • High-density fiberglass panels  lined internally with stainless steel plates and silicon rubber gaskets
  • Hydraulic plants complete with 3-ways valve, pump, by-pass, control valve, gauges and thermometers.
  • Air exchange systems realized with stainless steel channels and butterflies equipped with air suction and air input electro-fans with pre-heating batteries.
  • Highly performing axial fans with electric motors specially for the high temperature.
  • Sticks lenght  2000 and  2550 mm manufactured with reinforced aluminium alloy profiles and stainless steel hooks
  • Preliminary dryer whole ventilation and sticks conveyed by coupled tightened  chains.
  • Sticks conveyed in the drying gallery by double stainless steel racks having 4-angles movement.
  • High efficiency ventilation either for preliminary/final drying and cooling.
  • Independent cooler with sticks chain forwarding
  • Storage silos with independent passages to store different pasta shapes.
  • Independent sticks storage and sticks return systems.
  • Stairs and banisters to reach the machine roof realized according to international safety rules
  • Electric panel for control and automation by means of a plc  and supervision software on a personal computer.
  • Data trasmission assistance
Produzione
Production
Production
Producción
Pressa
Press
Presse
Prensa
Stenditrice
Spreader
Etendeuse
Extendedora
L Canna
L Stick
L Canne
Long. Caña
L A B C E
Silo di deposito - 10 h
Storage Tank - 10 h
Silo de dépôt - 10 h
Silo de depósito - 10 h
 
500 Kg/h 2.110.L 2000
St.Ax - 1
2000 38450 26800 3450 3780 4000
4 P – 9 Mt
750 Kg/h 2.130.L 2000
St.Ax - 1
2000 44450 32800 3450 3780 4700
5 P – 9 Mt
1000 Kg/h 2.145.L 2550
St.Ax - 1
2550 49250 37600 4000 3780 4700
5 P – 9 Mt
1250 Kg/h 2.145.L 2550
St.Ax - 2
2550 57250 43600 4000 3780 4700
5 P – 11 Mt
1500 Kg/h 2.165.L 2550
St.Ax - 2
2550 47150 34000 4000 5300 5400
6 P – 11 Mt
2000 Kg/h 2.165.L 2550
St.Ax - 3
2550 55650 40000 4000 5300 5400
6 P – 13 Mt
2500 Kg/h 2.210.L 2550
St.Ax - 3
2550 63650 46000 4000 5300 5400
6 P – 15 Mt
3000 Kg/h 2.210.L 2550
St.Ax - 4
2550 69650 52000 4000 5300 6800
8 P – 15 Mt
3500 Kg/h 4.165.L 2550
St.Ax - 4
2550 76850 58000 4000 5300 6800
8 P – 16 Mt

L.P.L. TI

Automatic and continuous L.P.L. line, engineered and manufactured for the production of long cut pasta on aluminium sticks, suitable for a production capacity from 500 to 4.000 kg/h. This line is suitable for drying any type of long-cut pasta, from the traditional spaghetto  Ø 1.7 to the candle diam. 18 mm.

The line is engineered to customize the drying diagram. The controlling devices along the line and the supervision by personal computer, allow the operator any kind of modification. 

The line consists of an AXOR-Ocrim press, manufactured as per the most modern technologies, allowing the operator to customize the dough as per his requirements.

Automatric spreader St.Ax to spread (more sticks at the same time) the product on the sticks. The spreader St.Ax ensure an efficaceous distribution of the product on the sticks.

Continuous predrying with complete ventilation and sticks driven by chain.  The chain is manufactured using a pitch that allows the hot air passage at high pressure coming from the fans placed on the heating batteries.

5 floors continuous dryer; sticks driven by a 4-angles movement by double flat-rack. The double flat rack has a constant pitch and allows the transport of the products all over the dryer floors. The set up climate is maintained by heating batteries and airing channels. The last floor of the dryer is used to stabilize the product.

The product cooling is realized in a thermically separate unit, connected by a chain lift. The cooling is ensured by the airing surrouding completely the product, and taking humidity to the required value.

The complete  L.P.L. line consists of :

  • Self-adjustable feet allowing to level machines to any type of floors.
  • Stainless steel supporting frames which grant stability and a longer lifetime of the whole installation.
  • High performance batteries with flanged connections uni 2282.
  • High-density fiberglass panels  lined internally with stainless steel plates and silicon rubber gaskets
  • Hydraulic plants complete with 3-ways valve, pump, by-pass, control valve, gauges and thermometers.
  • Air exchange systems realized with stainless steel channels and butterflies equipped with air suction and air input electro-fans with pre-heating batteries.
  • Highly performing axial fans with electric motors specially for the high temperature.
  • Sticks lenght  2000 and  2550 mm manufactured with reinforced aluminium alloy profiles and stainless steel hooks
  • Preliminary dryer whole ventilation and sticks conveyed by coupled tightened  chains.
  • Sticks conveyed in the drying gallery by double stainless steel racks having 4-angles movement.
  • High efficiency ventilation either for preliminary/final drying and cooling.
  • Independent cooler with sticks chain forwarding
  • Storage silos with independent passages to store different pasta shapes.
  • Independent sticks storage and sticks return systems.
  • Stairs and banisters to reach the machine roof realized according to international safety rules
  • Electric panel for control and automation by means of a plc  and supervision software on a personal computer.
  • Data trasmission assistance
Produzione
Production
Production
Producción
Pressa
Press
Presse
Prensa
Stenditrice
Spreader
Etendeuse
Extendedora
L Canna
L Stick
L Canne
Long. Caña
L A B C E
Silo di deposito - 10 h
Storage Tank - 10 h
Silo de dépôt - 10 h
Silo de depósito - 10 h
 
1500 Kg/h 2.165.L 2000
St.Ax - 3
2000 51500 37600 3450 5300 5400
6 P – 11 Mt
2000 Kg/h 2.165.L 2550
St.Ax - 3
2550 55500 40000 4000 5300 5400
6 P – 13 Mt
2500 Kg/h 2.210.L 2550
St.Ax - 3
2550 63500 46000 4000 5300 5400
6 P – 15 Mt
3000 Kg/h 2.210.L 2550
St.Ax - 4
2550 69500 52000 4000 5300 6800
8 P – 15 Mt
3500 Kg/h 4.165.L 2550
St.Ax - 4
2550 74500 58000 4000 5300 6800
8 P – 16 Mt
4000 Kg/h 4.165.L 2550
St.Ax - 4
2550 81500 64000 4000 5300 6800
8 P – 18 Mt

Catalogue of Pasta Shapes





EXPLORE ANOTHER EQUIPMENT: